MERCURI TRADING

This system is in excellent working condition. It has come out of a working environment, granulating plastic sprues and rejects.

The system consists of:
- 50HP Granulator
- Large Vibratory Hopper Feeder
- Large Infeed Incline Conveyor
- Blower and Large Cyclone Extraction System
- Pallet of spare screens and blades

GENOX GC800T COMPLETE INDUSTRIAL RECYCLING GRANULATOR SYSTEM LINE 50HP

This system is in great working condition. It was pull out of a working environment where it was shredding bulk lots of documents.
The system consists of a 15kW twin shaft shredder, 10HP auto tie baler, and a large incline infeed conveyor.
Utilising a 410mm wide infeed conveyor with receiving hopper the WM408E can shred at its optimum efficiency of over 1000kg per hour. The shredded product is fed into an AXO Work-Horse Auto Tie Baler.
The plants use minimal floor space and can be operated by one person.
Shredder Make: AXO
Model: WM408-12E
Motors: 15kW (2 x 7.5kW)
Shredder Opening: 600 x 400mm
Blade Thickness: 12mm
Baler Make: Godswill
Model: GB-0505F
Power: 10HP (7.5kW)
Bale Chamber(mm): 500 x 500 x 900
Bale Dimensions(mm): 500 x 500 x 600
Bale Density (O.C.C): 450~500 (kg/ m3)
Max.tdrust Force: 21 Ton (170kg / cm2)
Cycle Time (Unload): 13.8 sec
Production (40~60 kg/m3): 1~1.5 TPH
Weight: ~4 Ton
Overall Dimensions (mm): 3820 l x 2300 w x 2500 h (Dimensions not including conveyor)

AXO GODSWILL PAPER SHREDDER PLANT SYSTEM WITH AUTO TIE BALER AND CONVEYOR

This tire rasper set has two main units, the shredder unit and the conveyor unit. The entire set is in excellent condition.
Includes a vibratory conveyor which comes equipped with a magnetic belt that picks up metals, while the leftover debris will roll down an outlet channel that runs out the side.
The shredder is attached on top to a sturdy steel enclosure to house the conveyor unit, with access through the back doors.
Includes a switch board for simple controls for the operation of the set.
Comes with a set of spare screens (1x screen with 20mm diameter perforations, 1x screen with 10mm diameter perforations), set of 700mm blades and set of 2x plates.
At the time of listing there are two of these units available.
Make: Jiangyin Machinery
Model: CZ
Year: 2010
CONVEYOR UNIT
Belt Travel Length (mm): 1950
Belt Width (mm): 700
Belt Loading Height From Ground (mm): 1440
Feeder Inlet (mm): 900 L x 600 W
Side Outlet Chute (mm): 1120 L x 150 W x 130 H
Voltage (Conveyor Unit): 415V 3 Phase
Motor Power (Conveyor Unit): 0.55kW
Voltage (Conveyor's Vibratory Component): 415V 3 Phase
Motor Power (Conveyor's Vibratory Component): 1.1kW
Overall Conveyor Dimensions (mm): 2770 L x 1120 W x 1680
SHREDDER UNIT
Shredder Diameter (mm): 300
Shredder Screen Size (mm): 12
Shredder Inlet Size (mm): 750 L x 440 W
Shredder Outlet Size (mm): 660 L x 410 W
Voltage (Shredder Unit): 415V 3 Phase
Motor Power (Shredder Unit): 37kW
Overall Shredder Dimensions (mm): 1850 L x 1580 W x 2275 H

JIANGYIN CZ MEDIUM TYPE - INDUSTRIAL RECYCLING TIRE RASPER GRANULATOR

This system is in excellent working condition. It has come out of a working environment, granulating plastic spruces and rejects.
The system consists of:
- 50HP Granulator
- Blower and Large Cyclone Extraction System
GC Series Granulators are high speed granulation machines designed especially for the efficient size reduction of various materials in a single pass. These machines are ideal for processing a multitude of materials including plastics, rubber, copper cable and organics amongst others.
The SI in the model name denotes that this unit is a variant of the GC800T but with internal sound insulation.
· Compact design minimizes on-site space requirements
· Inclined, split cutting chamber design
· Precision machined rotors
· Replaceable wear plates at either end of the rotor shaft
· Standard machines are prepared for air extraction
The C-Rotor is a heavy duty, high inertia, semi-closed shaft design which creates a cascade cutting effect. This rotor design is ideal for processing particularly hard or thicker materials, but is also well suited to processing profiles.
Make: Genox
Model: GV800T-SI
Year: 2020
Voltage: 415V 3 Phase
Power: 37kW/50HP
Hopper Opening (mm): 645 L x 810 H
Rotor Diameter (mm): 420
Rotor Length (mm): 800
Rotor Speed: 580 RPM
Rotor Knives: 3 x 2 pcs
Counter Knives: 2 x 1 pcs
Granulator Weight: approx. 2500kg
Cyclone Diameter (mm): 1040
Cyclone Bottom Oulet (mm): 225
Cyclone Top-Side Opening (mm): 120
Cyclone Bag Outlet Diameter (mm): 360
Bag Length (mm): 2500
Overall Granulator Dimensions (mm): 2000 L x 1650 x 2300 H
Overall Cyclone Dimensions - with Frame (mm): 1980 L x 1610 W x 3340 H

GENOX GC800T-SI INDUSTRIAL RECYCLING GRANULATOR - 37 KW 50 HP

This baler is in great working condition.
It is hydraulically operated.
The 4-X 30 is suitable for retail shops and industrial companies with large quantities of waste. It is a compact machine with high capacity and superior press force.
This bale press has a very wide filling opening for handling larger boxes, making the daily operation as easy as possible. The finished bale can be tied with flat straps or steel wires.
Make: Bramidan
Model: 4-X 30
Year: 2006
SPECS
Voltage: 400V
Power: 4kW
Cycle Time: 34 seconds
Press Force: 30T
Bale Size (mm): 1200 W x 800 D x 1000 H
Bale Weight (Cardboard): 280 - 350kg
Bale Weight (Plastic): 400 - 500kg
Filling Opening (mm): 1090 x 600
Filling Height: 1150mm
Chamber Height: 1650
Stroke: 925mm
Noise Level: 68 dB
Weight: 1710kg
Overall Dimensions (mm): 1700 l x 1120 w x 2285 h

BRAMIDAN 4-X 30 INDUSTRIAL HYDRAULIC BALER BAILER COMPACTOR

This plastic granulator is in good condition, comes with a few screens and runs off a large 45kW motor.
This unit is ideally used for for crushing all kinds of plastic profile and pipe materials. Cutting down the pipe and/or segmenting the long plastic pipe first is not necessary as this machine is capable of being continuously fed. Great for products such as plastic doors, plastic tubes, plastic plates, window frames, trunking, sheets and so on, specifically PVC pipes of 315mm diameter and under.
Please Note: This unit's rotor and blades have sustained some damage (shown in photos). Unit will come with a new screen by us upon confirmation of purchase, but it will still need new blades.
Make: Camel Machinery
Model: SWP600
Year: 2021
Capacity: 600-700 kg/h
Throat Dimensions (mm): 630 L x 480 W
Screen Sizes: a set of 8mm and a set of 12mm
Loading Height (mm): 2020
Power: 415V 3 Phase
Motor Power: 45kW
Weight: 3000 kg
Overall Dimensions: 2040 L x 1500 W x 1920 H

CAMEL INDUSTRIAL PLASTIC RECYCLING GRANULATOR - 45KW

It is a single shaft unit driven by a large AEG motor.
The shaft on the rotor and gearbox has worn down and needs to be repaired.
The motor and everything else is good.
Replacement cost for this shredder is approximately $110,000.
Make: 3E Recycling
Rotor Length(mm): 1500
Screen Size - diameter (mm): 50
Feeder Shaft Dimensions (mm): 1850 L x 1650 W
Feeder Shaft Height from Ground (mm): 2580
Shredder Chamber (mm): 1200 L x 1135 W x 1250 D
Chamber Opening (mm): 1200 Wide
Chamber Opening Height from Ground (mm): 1270
Voltage: 415V 3 Phase
Motor: 75kW
Overall Dimensions (mm): 3100 L x 2300 W x 3000 H approx.

3E RECYCLING INDUSTRIAL SINGLE SHAFT SHREDDER - 75KW

This granulator is in good working condition.
We have a few of these granulators available at the time of listing
Runs off a 11kW 415V motor.
Can granulate all types of plastic, copper, rubber, etc.
Make: Jinhengli
Model: HC-2650
Year: 2014
Power: 415V 11kW
Throat Opening: 500 x 280mm
Hopper Opening: 500 x 300mm
Screen Size: 10mm
Overall Dimensions: 980 (l) x 1550 (w) x 1800 (h)

JINHENGLI HC-2650 INDUSTRIAL 11KW 415V PLASTIC GRANULATOR

Steel constructed centrifuge spin dryer for efficient moisture removal.
Built for industrial and/or commercial use. This machine is mainly used in plastic processes and used to de-water processed materials.
The centrifuge internals and rotor screens are made of stainless steel and are easy to remove for cleaning.
Inlet Dimensions (mm): 300 L x 150 W
Water Outlet Diameter (mm): 90
Cyclone Outlet Diameter (mm): 150
Rotor Screen Perforations Diameter (mm): 4
Voltage: 415V 3 Phase
Motor Power: 15kW
Overall Dimensions (mm): 1700 L x 860 W x 2300 H

VERTICAL CENTRIFUGAL DEWATERING PLASTIC RECYCLING DRYER MACHINE DEWATERING PLASTIC RECYCLING MACHINE

In great working condition.
It comes with a spare 8mm screen.
Runs off a large 18.5kW motor.
It can granulate all types of plastic, copper, rubber, etc.

INDUSTRIAL PLASTIC GRANULATOR 18.5KW - 405 X 350MM

The machine is ideally suited for small warehouses where automation is a prime consideration.
Operating Pressure: 50T
Bale Size (mm): 760H x 760W x (var.)1200L
Bale Weight: 250 - 320Kg*
Capacity: 1.5 - 2.8 tonnes / Hr.*
(* Depending on Material)

HYDRA-PAC HBAE3030-50C HORIZONTAL AUTOMATIC TIE BALER

This shredder is in great working condition. For shredding large quantities of paper and cardboard sheets.
It has a large collection bin. Made in Germany.
Voltage: 400-440V
Power: 4.0kW
Feed Belt (mm): 775 L x 400 W
Discharge Opening (mm): 410 L x 260 W
Overall Dimensions (mm): 1310 L x 1175 W x 1205 H

INDUSTRIAL PAPER DOCUMENT SHREDDER 400MM WIDE

Find Recycling - Refuse For Sale from MERCURI TRADING.

New & Used Recycling - Refuse For Sale in Australia

MERCURI TRADING

Sale Price

GENOX GC800T COMPLETE INDUSTRIAL RECYCLING GRANULATOR SYSTEM LINE 50HP

AXO GODSWILL PAPER SHREDDER PLANT SYSTEM WITH AUTO TIE BALER AND CONVEYOR

JIANGYIN CZ MEDIUM TYPE - INDUSTRIAL RECYCLING TIRE RASPER GRANULATOR

GENOX GC800T-SI INDUSTRIAL RECYCLING GRANULATOR - 37 KW 50 HP

BRAMIDAN 4-X 30 INDUSTRIAL HYDRAULIC BALER BAILER COMPACTOR

CAMEL INDUSTRIAL PLASTIC RECYCLING GRANULATOR - 45KW

3E RECYCLING INDUSTRIAL SINGLE SHAFT SHREDDER - 75KW

JINHENGLI HC-2650 INDUSTRIAL 11KW 415V PLASTIC GRANULATOR

VERTICAL CENTRIFUGAL DEWATERING PLASTIC RECYCLING DRYER MACHINE DEWATERING PLASTIC RECYCLING MACHINE

INDUSTRIAL PLASTIC GRANULATOR 18.5KW - 405 X 350MM

HYDRA-PAC HBAE3030-50C HORIZONTAL AUTOMATIC TIE BALER

INDUSTRIAL PAPER DOCUMENT SHREDDER 400MM WIDE

MERCURI TRADING

Dealer Address