MERCURI TRADING

2021 Industrial screw air compressor in good condition.
Robust and built for continuous operation in demanding production environments. Delivers reliable compressed air at 8 bar, suitable for a wide range of industrial applications.
Typical Applications: Continuous supply of compressed air for pneumatic tools and production lines Industrial manufacturing, workshops, and maintenance facilities
Model: JB-30A
Year: 2021
Free Air Delivery: 3.6 m³ per min / 127 CFM
Max. Working Pressure: 8 bar
Rated Voltage: 415V 3 Phase Motor
Power: 22kW / 30HP
Machine Weight: 343kg
Overall Dimensions (mm): 1250 L x 820 W x 1165 H

SCREW AIR COMPRESSOR JB-30A 22KW

In great working condition.
The frame is made out of stainless steel and the belt is modular link plastic.
Belt Width: 250mm
Belt Height: 950mm

CONTECH STAINLESS CURVED 90 DEGREE CORNER MOTORISED CONVEYOR

In great working condition.
It is a twin shaft paddle mixer with a built on tub lifter.
The tank has two sliding hatches on the bottom that is pneumatically controlled for easy discharge.
Top Opening: 1515 x 1015mm
Capacity: Approx. 1000L
Power: 11kW

COMMERCIAL STAINLESS STEEL TWIN PADDLE MIXER 1000L

Hydraulic power pack built for reliable continuous operation in demanding environments.
Equipped with a Vickers PVQ10 A2R SE1S variable displacement axial piston pump, this unit delivers smooth, quiet performance with precise pressure control. Designed for efficiency and long service life. Ideal for machine tools, presses, clamping systems, and general hydraulic circuits requiring consistent flow and automatic pressure compensation.
Tank Volume: 100L approx.
PVQ10 Piston Pump
Max Displacement (³/r): 10.5 cm³/rev (0.64 in³/rev)
Rated Speed: 1800 RPM
Max Pressure (PSI): 3000 (210 bar)
Rated Voltage: 415V 3 Phase
Overall Dimensions (mm): 745 L x 510 W x 900 H

VICKERS INDUSTRIAL HYDRAULIC POWER PACK UNIT - 100L

Belt Height: 610mm
Table Width: 1175mm
Motor: 5.5kW 415V

SO-RITE INDUSTRIAL LARGE WIDE BELT LINISHER EDGE SANDER - 610MM

This plastic granulator is in good condition, comes with a few screens and runs off a large 45kW motor.
This unit is ideally used for for crushing all kinds of plastic profile and pipe materials. Cutting down the pipe and/or segmenting the long plastic pipe first is not necessary as this machine is capable of being continuously fed. Great for products such as plastic doors, plastic tubes, plastic plates, window frames, trunking, sheets and so on, specifically PVC pipes of 315mm diameter and under.
Please Note: This unit's rotor and blades have sustained some damage (shown in photos). Unit will come with a new screen by us upon confirmation of purchase, but it will still need new blades.
Make: Camel Machinery
Model: SWP600
Year: 2021
Capacity: 600-700 kg/h
Throat Dimensions (mm): 630 L x 480 W
Screen Sizes: a set of 8mm and a set of 12mm
Loading Height (mm): 2020
Power: 415V 3 Phase
Motor Power: 45kW
Weight: 3000 kg
Overall Dimensions: 2040 L x 1500 W x 1920 H

CAMEL INDUSTRIAL PLASTIC RECYCLING GRANULATOR - 45KW

Air duct heater unit made of galvanized steel in good condition, tested and ready to go.
Commonly used in industrial and commercial HVAC applications where large volumes of air and/or gas needs to be heated regularly within the duct work. Utilises electric to heat and has a dial to control temperature.
Comes with an additional 1m long duct.
Make: Helios
Made in Australia
Voltage: 415V 3 Phase
Power: 22.5kW
Duct Openings Diameter (mm): 160
Overall Dimensions (mm): 1950 L x 450 W x 380 H

HELIOS INDUSTRIAL AIR DUCT HEATER - 2M LONG

Make us an offer! We're highly negotiable and take all reasonable offers seriously.
High capacity industrial microwave dryer in excellent condition. Designed for fast, uniform drying and sterilization of food, herbs, powders, and granular materials. Built for continuous operation with a durable stainless steel frame and user friendly PLC control system.
Typical Applications:
High volume food dehydration, herb and leaf drying, powder processing, chemical drying, insect or larvae processing, and other industrial drying or sterilization processes etc.
Features:
- 200 kW microwave output for rapid, efficient drying
- Conveyor based continuous operation with PTFE food-grade belt
- Adjustable transmission speed: 16m per minute
- Water cooled magnetrons for 24-hour continuous operation
- PLC control system with adjustable temperature range (0300C)
- Built with stainless steel for hygiene and durability
Make: Kelid
Model: KLD 200 SL
Entrance & Exit Length (mm): 800 x 2
Suppressor Opening Height (mm): 55
Suppressor Length (mm): 1200 x 2
Anti-Microwave Leakage Guide Piece: 800
Conveyor Belt: PTFE
Conveyor Belt Width (mm): 1000
Conveyor Belt Ground Clearance (mm): 800 +/- 50
Microwave Frequency: 2450 MHz +/- 50 MHz
Microwave feed-in method: Top feeding method (Multi-source multi-cavity distribution)
Transmission Speed: 1m to 6m per minute
Transmission Motor Power: 3 kW
Rated Input Power: 250 kVA
Output Power: 200 kW
Microwave effect box quantity: 10 groups
Observation window quantity: 10 groups
Magnetron cooling method: Water cooled( machine can run for 24 hours continuously)
Input water temp: < 30C (or equal to)
Output water temp: < 60C (or equal to)
Transformer: Oil cooling (Inside); Air cooling (outside)
Controller: PLC
Temperature detection range: 0-300C (Adjustable)
Main material: Stainless Steel
Working environment warning: No excessive corrosive gas around; No flammable or explosive gas;
Ambient temp: -10-40C
Ambient relative humidity: < 60% (or equal to)
Microwave leakage standard: In line with national standards: < 2mW/cm²
Overall Dimensions (mm): 23,000 L x 1000 W x 520 H
Required Space (mm): 29,800 L x 2500 W x 2500 H (smooth cement floor)
Cooling Tower Model: 30T Closed Type Cooling Tower
Cooling Capacity: 150,000 kcal/h
Water Quantity: 30m3/h
Blower power: 1.5 kW x 2
Spray pump power: 0.75 kW
Main circulating pump power: 4kW
Inlet / outlet diameter: DN:65
Working pressure: 0.1~0.3Mpa
Dimensions (mm): 3000 L x 1400 W x 2300 H
Make us an offer! We're highly negotiable and take all reasonable offers seriously.

KELID KLD200 INDUSTRIAL MICROWAVE DRYER CONTINUOUS CONVEYOR TUNNEL - 200KW

This semi-automatic weigh filling machine is in great condition and is designed to weigh and fill a wide range of products into bags, cartons, trays, boxes, jars and other small containers.
Features stainless steel frame and contact parts. It has a Wedderburn weighing system installed to reliably and accurately weigh and fill a wide range of products including nuts, snack foods, candy, hardware, frozen foods, vegetables, fruits, meats, poultry, ingredients, spices, coffee, powders, granules and pet food etc.
This unit can be readily integrated with other packaging equipment for an improved production line.
Make: Paxiom
Model: Primo v5
Bucket Volume: 5L
Fill range - (HIGHLY Dependent on product): 0.5 kg to 5 kg
Air Consumption: 2 CFM at 60 PSI
Voltage: 240V Single Phase

PAXIOM PRIMIO V5 - DOY BAG WEIGHER FILLER PACK SEALER PACKAGING MACHINE

The mill is in good condition.
Australian made - sturdy and reliably built.
It came from a laboratory that would use the machine to masticate, disperse and mix polymers, including rubber, plastic and mixtures with similar melting points.
Make: Vickers Ruwolt
Made in Australia
Voltage: 415V
Motor Power: 7.5 HP
Motor Speed: 1445 RPM
Roller Width (mm): 385
Roller Diameter (mm): 135
Overall Dimensions (mm): 1950 L x 925 W x 1435 H

VICKERS RUWOLT LABORATORY TWO ROLL RUBBER PLASTIC MIXING MILL

This pump is in great condition. It is worth approx $14,000 new.
ARO pumps feature stall resistant design, modular air motor / fluid sections.
Air operated double diaphragm pumps utilize a pressure differential in the air chambers to alternately create suction and a positive fluid pressure in the fluid chambers, valve checks insure a positive flow of fluid.
Maximum Air Inlet Pressure: 120 psig (8.3 bar)
Maximum Flow Rate (flooded inlet): 897.0 lpm

ARO 666321-244-C AIR OPERATED STAINLESS STEEL DIAPHRAGM PUMP

This metal detector is in good working condition.
It is designed to have products dropped into the hopper which lands on the conveyor belt.
If there is metal detected in one of the products the system activates the air controlled rejector and the product gets pushed into a chute off the side and into a container underneath the unit.
Detector Make: Safeline
Model: SIG 500 150
Opening Size (mm): 440 W x 120 H
Conveyor Length: 2700mm
Voltage: 230V Single Phase
Overall Dimensions (mm): 2820 x 1250 x 1965 h

SAFELINE STAINLESS CONVEYOR METAL DETECTOR WITH REJECTOR 440 X 120MM OPENING

Find Plant and Equipment For Sale in Victoria. Browse 1477 listings from MERCURI TRADING.

New & Used Plant and Equipment For Sale in Victoria

MERCURI TRADING

Sale Price

SCREW AIR COMPRESSOR JB-30A 22KW

CONTECH STAINLESS CURVED 90 DEGREE CORNER MOTORISED CONVEYOR

COMMERCIAL STAINLESS STEEL TWIN PADDLE MIXER 1000L

VICKERS INDUSTRIAL HYDRAULIC POWER PACK UNIT - 100L

SO-RITE INDUSTRIAL LARGE WIDE BELT LINISHER EDGE SANDER - 610MM

CAMEL INDUSTRIAL PLASTIC RECYCLING GRANULATOR - 45KW

HELIOS INDUSTRIAL AIR DUCT HEATER - 2M LONG

KELID KLD200 INDUSTRIAL MICROWAVE DRYER CONTINUOUS CONVEYOR TUNNEL - 200KW

PAXIOM PRIMIO V5 - DOY BAG WEIGHER FILLER PACK SEALER PACKAGING MACHINE

VICKERS RUWOLT LABORATORY TWO ROLL RUBBER PLASTIC MIXING MILL

ARO 666321-244-C AIR OPERATED STAINLESS STEEL DIAPHRAGM PUMP

SAFELINE STAINLESS CONVEYOR METAL DETECTOR WITH REJECTOR 440 X 120MM OPENING

MERCURI TRADING

Dealer Address