MERCURI TRADING

This tire rasper set has two main units, the shredder unit and the conveyor unit. The entire set is in excellent condition.
Includes a vibratory conveyor which comes equipped with a magnetic belt that picks up metals, while the leftover debris will roll down an outlet channel that runs out the side.
The shredder is attached on top to a sturdy steel enclosure to house the conveyor unit, with access through the back doors.
Includes a switch board for simple controls for the operation of the set.
Comes with a set of spare screens (1x screen with 20mm diameter perforations, 1x screen with 10mm diameter perforations), set of 700mm blades and set of 2x plates.
At the time of listing there are two of these units available.
Make: Jiangyin Machinery
Model: CZ
Year: 2010
CONVEYOR UNIT
Belt Travel Length (mm): 1950
Belt Width (mm): 700
Belt Loading Height From Ground (mm): 1440
Feeder Inlet (mm): 900 L x 600 W
Side Outlet Chute (mm): 1120 L x 150 W x 130 H
Voltage (Conveyor Unit): 415V 3 Phase
Motor Power (Conveyor Unit): 0.55kW
Voltage (Conveyor's Vibratory Component): 415V 3 Phase
Motor Power (Conveyor's Vibratory Component): 1.1kW
Overall Conveyor Dimensions (mm): 2770 L x 1120 W x 1680
SHREDDER UNIT
Shredder Diameter (mm): 300
Shredder Screen Size (mm): 12
Shredder Inlet Size (mm): 750 L x 440 W
Shredder Outlet Size (mm): 660 L x 410 W
Voltage (Shredder Unit): 415V 3 Phase
Motor Power (Shredder Unit): 37kW
Overall Shredder Dimensions (mm): 1850 L x 1580 W x 2275 H

JIANGYIN CZ MEDIUM TYPE - INDUSTRIAL RECYCLING TIRE RASPER GRANULATOR

- Make: Toyota
- Model: 7FGCU55
- Origin: Indiana, U.S.A.
- DoM: 2010
TECHNICAL:
- Runs & drives well
- Vortex GM engine
- Automatic transmission
- Cascade Rotating 5t clamp
- Can have a choice of carriage fitted at an agreed price.
- Serviced and maintained by Toyota
- 10,990hrs
- 3765mm lifting height
- Dual fuel (gas/petrol)
- 5.5T lifting capacity
- Cushion tires 65%
- Brand new heavy duty Nulon battery
- Compact unit great for inside and outside concrete yards/factories
- Clean all original unit
- Was speed limited so has not had a hard life

TOYOTA 2010 TOYOTA 5.5T 7FGCU55 COMPACT LPG FORKLIFT

Large tank container in great condition. Bulkibox variety; fully approved for transport of dangerous goods.
The tank unit is made for heavy duty with a galvanized steel frame.
The steel frame has two-way forklift entry for convenient transport.
Features:
- Fully approved for transport of Dangerous Goods, the Bulkibox range offers safe, secure storage and transportation of dangerous and toxic chemicals.
- Made from high density polyethylene and is encased in a heavy duty, hot dipped galvanised steel frame with solid mesh sides
- Forklift access, stacking capabilities and is top lift certified
- ISO Pallet size (1150 x 1150mm)
Make: Nylex Rotomould
Model: Bulkibox
Made in Australia
Capacity: 1000L approx.
Tank Dimensions (mm): 1120 L x 1120 W x 850 H
Inlet Diameter (mm): 235
Outlet Diameter (mm): 50
Overall Dimensions (mm): 1170 L x 1170 W x 1235 H

NYLEX ROTOMOULD BULKIBOX HEAVY DUTY DANGEROUS GOODS IBC TANK - 1000L

This mixer is in great working condition.
The tank is jacketed and it consists a side wall scraper and a agitator mixer.
Make: Damrow Company
Year: 1991
SPECS
Capacity: Approx. 500 Litres
Tank Diameter: 1520mm
Voltage: 415V 3 Phase
Motor 1 Power: 5HP
Motor 2 Power: 1HP
Jacket Max Allowable Working Pressure: 150PSIG @ 100F
Overall Dimensions (mm): 1700 x 1700 x 2000 h

STAINLESS STEEL JACKETED MIXER MIXING TANK 950L

This conveyor is in great condition. The belt is made out of stainless steel chain links. The unit has wheels as well as brakes for ease of mobility and has a VSD installed.
Belt Travel (mm): 2500
Belt Width (mm): 865
Belt Height (mm): 1120
Power: 415V 3 Phase
Motor Power: 0.37kW
Motor Speed: 1380 RPM
Overall Dimensions - Fully Extended (mm): 2500 L x 1120 W x 1165 H

STAINLESS STEEL MOTORISED CHAIN LINK BELT CONVEYOR 2.5M LONG

- Description: Motorised Roller Conveyor
- Model: Custom Made
- Origin: Made in Australia
APPLICATION:
"This motorised roller conveyor may be ideal for use in industries such as manufacturing, packaging, warehousing, or logistics. It may assist businesses requiring the transportation of goods or materials along a production or packing line. The system features dual sections, allowing for flexible material handling. Powered by a SEW-Eurodrive motor, the conveyor may provide steady and controlled movement along its travel length.."
FEATURES:
- Motorised rollers
- Extruded Aluminium frame
- Adjustable height legs for flexible installation
- Integrated control panel with emergency stop
ROLLER CONVEYOR DETAILS:
- Travel Length (mm): 1900
- Width: 1000 mm
- Roller Diameter: Approx. 55 mm
- Height from GFL: 900 mm
MOTOR:
- Type: Induction Motor
- Make: SEW-Eurodrive
- Model: SF37 DRS71S4
- Power: 0.37 kW
- RPM: 1380
- Voltage: 420V
- Current: 1.24 A
- Frequency: 50 Hz
- Phase: 3-Phase
MEASUREMENTS:
- External Dimensions (mm): 2010 L x 1180 W x 1100 H

MOTORISED ROLLER CONVEYOR - DUAL SECTION 1.9M LONG

This shredder is in great working condition.
It is a twin shaft unit that is powered by a 3kW motor.
Designed to shred lightweight materials.

INDUSTRIAL STYROFOAM SHREDDER UNIT WITH CONVEYOR, BLOWER AND HEATER DRYER 3KW

Stainless steel steam pasteuriser for pasta in excellent condition. Provides thermal pasteurisation of fresh pasta products using steam. The machine features a mesh conveyor belt running through an enclosed tunnel, where water in a shallow reservoir is heated by a gas fired system. This was supplied in Australia by MEC Australia.
Features:
- Stainless steel construction
- VSD controlled mesh conveyor
- Enclosed steam pasteurisation tunnel
- Gas heated for steam generation
Gas Type: Nautral
Nominal Gas Consumption: 150 MJ/hr
Maximum Gas Pressure: 1.1 kPa
Gas Pressure at burner head: 1.0 kPa
Conveyor Width (mm): 450
Conveyor Height (mm): 700
Pasteuriser Tunnel Length (mm): 2080
Pasteuriser Tunnel Entrance (mm): 510 W x 125 H
Heating Tunnel Length (mm): 1110
Heating Tunnel Entrance (mm): 470 W x 50 H
Total Conveyor Travel (mm): 3760
Power Requirements: 415V 3 Phase
Motor Power: 0.18 kW
Motor Speed: 1380 RPM
Overall Dimensions (mm): 4010 L x 810 W x 1480 H

STAINLESS STEEL GAS STEAM PASTEURISER PASTEURISER

This frame/stand is in good condition.
Made out of good quality stainless steel.
Overall Dimensions (mm): 2515 L x 1720 W x 2660 H

STAINLESS STEEL STAND FRAME STAND RISER 2.6M HIGH

Hyundai 1.8t 3 wheel electric Forklift
- Model: 18-ST7
- 3 Stage 4.3m container Mast
- Side shift
- Standard tines
- Power Steering
- New paint
- Full Lighting, Mirrors, and Indicators
- Good Solid front tyres
- Good Solid rear tyres
- 2011 Year Model
- 5800 Operating Hours
- Seat with Retractable Seat Belt
- Strobe Light and Reverse Beeper
- Battery charger included
- Batterys check good
Workshop Checked & will be serviced before sale.
Can assist in delivery Australia wide with very competitive pricing.
Sold as traded.

HYUNDAI 18-ST7 ELECTRIC FORKLIFT CONTAINER MAST SIDE SHIFT

Reliable heat exchange efficiency.
The GR2A series water cooling units are compact-air condensed units with evaporator plates and an internal tank at atmospheric pressure, with centralised or dedicated cooling circuit modes.
Suitable for various industrial applications such as plastic and rubber processing, die casting, electroplating, ceramic pressing an other industrial processes.
Built for durability. Tested and in great operational condition.
Features:
Stainless steel plate evaporators
Stainless steel high flow process pumps
Scroll compressor technology
Oversized high-efficiency copper tube aluminium finned condenser
Copper evaporator with high-efficiency water-gas exchange copper tubes
Flow sensor and pressure switches for high and low pressure
Water level sensor and automatic fill
Axial fans with automatic speed control
Make: Fleming / Industrial Frigo
Model: GR2A 11/X
Year: 2016
Made in Italy
Voltage: 415V 3 Phase
Nominal Cooling Capacity: 8kW / 6680 kcal/h
Pump Power: 0.75kW
Pump Flow (nominal): 30L/min
Pump Pressure (nominal): 3.2 bar
Fan Flow Rate: 7800 m³/h
Top Fan Diameter (mm): 580
Overflow Diameter (mm): 25
Filter Size (mm): 930 x 525
Overall Dimensions (mm): 850 L x 650 W x 1200 H

INDUSTRIAL FRIGO GR2A 11/X INDUSTRIAL WATER CHILLER

Make us an offer! We take all reasonable offers into consideration and are highly negotiable.
From renowned magnetic solutions manufacturer, Eriez, this coolant cleaner is in good condition. These units are equipped with magnetic rolls that are used separate ferrous contaminants from machine tool coolants to extend the life of cutting tools, grinding wheels, pumps and coolant fluids etc.
Applications:
Surface grinders
Gear grinders
Honing and lapping machines
Broaches
Milling and drilling machines
Face grinders
Oil reclaiming machines
Rotor Length (mm): 550 approx.
Rotor Diameter (mm): 200 approx.
Tray Size (mm): 560 L x 320 W x 100 H/D
Voltage: 415V 3 Phase
Motor Power: 0.12 kW
Motor Speed: 900
Overall Dimensions (mm): 815 L x 750 W x 480 H
Make us an offer! We take all reasonable offers into consideration and are highly negotiable.

ERIEZ MAGNETIC COOLANT CLEANER

Find Plant and Equipment For Sale. Browse 1450 listings from MERCURI TRADING.

New & Used Plant and Equipment For Sale

MERCURI TRADING

Sale Price

JIANGYIN CZ MEDIUM TYPE - INDUSTRIAL RECYCLING TIRE RASPER GRANULATOR

TOYOTA 2010 TOYOTA 5.5T 7FGCU55 COMPACT LPG FORKLIFT

NYLEX ROTOMOULD BULKIBOX HEAVY DUTY DANGEROUS GOODS IBC TANK - 1000L

STAINLESS STEEL JACKETED MIXER MIXING TANK 950L

STAINLESS STEEL MOTORISED CHAIN LINK BELT CONVEYOR 2.5M LONG

MOTORISED ROLLER CONVEYOR - DUAL SECTION 1.9M LONG

INDUSTRIAL STYROFOAM SHREDDER UNIT WITH CONVEYOR, BLOWER AND HEATER DRYER 3KW

STAINLESS STEEL GAS STEAM PASTEURISER PASTEURISER

STAINLESS STEEL STAND FRAME STAND RISER 2.6M HIGH

HYUNDAI 18-ST7 ELECTRIC FORKLIFT CONTAINER MAST SIDE SHIFT

INDUSTRIAL FRIGO GR2A 11/X INDUSTRIAL WATER CHILLER

ERIEZ MAGNETIC COOLANT CLEANER

MERCURI TRADING

Dealer Address