This saw is in great working condition.
It was in production making picture frames.
New replacement price for these machines is around $16000

Moulding is held securely by adjustable twin vertical clamps. The clamps can be operated by a foot switch, or set to engage automatically when the blade descent starts.
Twin push buttons activate blade descent
Blade descent is adjustable - on narrow moulding the descent / stroke can be reduced, speeding the cycle time.
Cutting cycle time estimated at 700 - 800 per hour, although this in only one factor in production speed.
Left-hand moulding support table

Blades are fixed to a single chassis, so they travel together with no possibility of movement or misalignment.
For optimum cut quality it is essential to use correct and well maintained blades. Blade descent speed must also be set correctly - slower for harder woods and faster for polymer.

T-350 - 350mm blades. Max moulding 80mm wide x 80mm deep
All blades have a 30mm bore and twinpeg arbors
Blades are mounted as close together on the chassis to give minimal waste

Make: Alfamacchine
Model: T-350

Power: 415V
Motors: 2 x 2HP
Overall Dimensions (mm): 3700 x 710 x 1650mm